2024 Toro Groundsmaster® 3500 Series 3505-D (30849)

Information

2024 Toro Groundsmaster® 3500 Series 3505-D (30849)

The Groundsmaster® 3500 Series is a revolutionary triplex rotary mower designed for superior performance trimming. The free-floating Contour™ Plus cutting decks allow mowing of undulating terrain without scalping. The powerful engine and exclusive traction drive system, gets the mowing job done quickly.

Features may include:

Operator Comfort
  • Deluxe seat adjusts to let you customize your work environment and reduce fatigue. Plenty of space at the operators station paired with easy-to-read controls increases comfort. Plus the steering wheel tilts for steering preference.
Quality of Cut
  • The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut, while an acceleration baffle speeds clipping circulation and assures maximum power. In addition, a unique directional vane and modified discharge opening deliver even clipping dispersion.
Scalp-Free Mowing
  • The ground-following design of each Contour™ Plus free-floating deck permits mowing the most challenging berms without scalping. Two front rollers and a rear roller allow the deck to smoothly pass over turf.

Photos

Highlights

  • Owatonna, Minnesota
  • 2024
  • Toro
  • Groundsmaster® 3500 Series 3505-D (30849)
  • Kubota® 3-cylinder, liquid-cooled diesel.
  • Fuel filter/water separator
  • Available
  • Transport: 72.5" (184 cm)
  • 76" (193 cm) with ROPS | of Cut Range: 0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm) increments. 3-position 0.030" (0.08 cm) incremental calibration

Specifications

  • 2024
  • Toro
  • Groundsmaster® 3500 Series
  • 3505-D (30849)
  • Riding
  • Kubota® 3-cylinder, liquid-cooled diesel.
  • Liquid Cooled
  • 24.8 hp (18.5 kW)
  • 3-cylinder
  • 1123cc. EPA Tier IV Final and Stage V Compliant.
  • Fuel filter/water separator
  • Diesel | Traction Drive: 3WD
  • Hydraulic power steering, tilt wheel
  • 3-wheel drive in mow and transport. Series/Parallel hydrostatic, closed-loop transmission provides infinitely variable ground speed in forward and reverse. Variable displacement piston type pump.
  • Dynamic through hydrostatic transmission service brake. Hand actuated over center, drum type parking brake.
  • 12V
  • Cutting Unit Lift/Lower: Joystick control for deck raise and lower | System: 12-volt 585 CCA battery and 40 amp alternator
  • 20" x 12" - 10", 4-ply, Turf Tread
  • 20" x 10" - 10", 4-ply, Turf Tread
  • Ground Speed - Forward: 0 - 9 mph (0 - 14 km/h) | Ground Speed - Reverse: 0 - 4 mph (0 - 6.4 km/h) | Mowing Speed: 0 - 6 mph (0 - 10 km/h)
  • Formed steel, welded steel and steel tubing
  • Product: 116" (295 cm)
  • 76" (193 cm) with ROPS | of Cut Range: 0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm) increments. 3-position 0.030" (0.08 cm) incremental calibration
  • Transport: 72.5" (184 cm)
  • 71.8” (182 cm) with standard 68” (173 cm) width of cut 75.8” (193 cm) width of cut
  • 68" (173 cm)
  • 11 U.S. gal. (41.6 L)
  • 2,110 lbs. (957 kg) with cutting units
  • Blade Style/Type: Rotary | Number of Blades: 3
  • Cutting Unit Type/Configuration: Three Contour™ Plus 27" (69 cm), rear-discharge rotary with standard full-length striping rear rollers on each deck. Sidewinder® system allows all three decks to slide right and left 12" (30 cm) of center, 24" (61 cm) total travel. 68" (173 cm), standard Deck overhang for trimming is 12" (30.5 cm) @ 68" (173 cm) width of cut and 14" (35 cm) @ 72" (183 cm). Overlap: 6.5" (16.5 cm) at standard width of cut.
  • Fuel gauge and hour meter. Light cluster with check engine and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).